Telefon

+90 312 212 11 08

Çalışma Saatleri

10:00 - 19:00

E-Posta

info@murpanaudio.com
Türkçe English

Russell Kaufman RED-150

4_1523264691.jpg

Russell Kaufman RED-150 

Precision Audio Loudspeaker System

38000.- TL + KDV

Stoklarımızda kalmamıştır.

Cabinet:

Dimensions  H- 950mm (1000mm including plinth, base and spikes) W-240mm D-250mm

Construction 16mm MDF all sides apart from front baffle which is 19mm.

Totally undamped cabinet

3 acoustic loading bracing shelves with multiple apertures, mounted below the tweeter, below the bass mid driver and below the sub bass driver

1 bracing shelf mounted near the bottom of the enclosure containing an internal port

Internal port vents into a small chamber containing 2 asymmetric length reflex ports tuned as a system to 21Hz


Drive units:

2 x 6.5” Bass units with impregnated paper cone and curved optimised acoustic profile

High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring

25mm soft dome tweeter

Double Ferrite magnet system

Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring


Crossover

All drivers connected in positive phase

Sub bass driver starts roll off at 80Hz 6db/Oct fed by “Enclosed Field Iron Core Inductor”. Features high power without saturation, very low DCR and almost no stray magnetic field

Bass/Mid driver crossover frequency 2200Hz nominal 12 db/Oct. Utilises an “Enclosed Field Ferrite Core Inductor “in the signal path. Very low DCR nominal stray fields

Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad

All Drivers have only one component in the signal path

Phase optimised through the crossover region

In room usable frequency response 20Hz-22KHz (dependent on room)

Sensitivity: 87db 1 watt 1 Metre


Powered by Bilgeweb